Part

Mi-T-M: HHB Series

Hot Water, Electric Direct/Belt Drive

Pump:
· Belt drive triplex General pump
· Thermal relief valve
· Easy pump oil drain
· Adjustable high pressure detergent injection

Motor:
· Open drip-proof electric motor with thermal overload protection
· 35-foot power cord (GFCI with 20A plug)

Frame:
· Wrinkle-finish powder coated steel frame assembly
· Wand holder
· 13-inch pneumatic tires with tubes
· Locking rear wheel brake prevents unit from rolling

Components:
· Racor fuel/water separator
· Pressure switch and high limit switch safety controls - 35 foot power cord (GFCI with 20-amp plug on 1.5 to 6.0 HP, 1Ø models except on 208V, 1Ø models)
· On/off pump/motor switch
· On/off burner switch
· Adjustable thermostat 
· Polyethylene float tank with inlet filter screen
· Adjustable high pressure detergent injection

Unit Includes:
· Insulated trigger gun with safety lock-off
· Adjustable pressure-insulated dual lance/wand
· 50-foot x 3/8-inch high pressure hose with quick connects
· Quick connect nozzles (0°, 15°, 25° and 40°) and low pressure nozzle

Miscellaneous: Temperature rise 150°F/66°C above ambient, maxium outlet temperature is 200ºF


Part

Mi-T-M: HSE Series

Hot Water, Electric Powered Oil-Heated Belt Drive

Pump:
· Direct triplex General pump with ceramic plungers
· Stainless-steel and brass unloader valve
· Forged brass manifold
· Thermal relief valve

Motor:
· Totally enclosed fan-cooled electric motor with manual thermal overload protection
· 35-foot power cord with in-line GFCI which meets required CSA certification
· Solid state electronic ignition

Frame:
· Reinforced powder coated steel tube frame with center balanced lifting hook
· Electric cord hanger
· Powder coated steel gun/wand holder
· Flat-free tires
· Locking tire brake

Components:
· Energy-efficient top-fired heat exchanger designed for convenient troubleshooting and easy maintenance
· High quality fuel filter/water separator ensures clean fuel supply
· Complete system diagnostic board
· Float tank
· Pressure and high limit safety controls
· No. 1 or No. 2 diesel or kerosene fired burner (Bio-fuel not approved at this time)
· Polyethylene burner fuel tank
· Easy coil drain helps prevent freezing in cold weather

Unit Includes:
· Quick connect nozzles (0°, 15°, 25° and 40°)
· 50-foot x 3/8-inch steel wire-braided pressure hose with swivel, quick connects and bend restrictors
· Professional-grade insulated trigger gun with safety lock-off
· Adjustable pressure insulated dual lance

Miscellaneous:
· Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F
· Water output temperature is 190°-200°F

View more Mi-T-M products


Part

Mi-T-M: HHS Series

Hot Water, Electric Powered Oil-Heated Belt Drive

Pump:
· Thermal relief valve
· Easy pump oil drain motor
· Open drip-proof electric motor with thermal overload protection

Frame: Wand holder

Components: Pressure switch and high limit switch safety controls

Unit Includes:
· Insulated trigger gun with safety lock-off
· Adjustable pressure-insulated dual lance/wand (except on HHS-303)
· Single lance with dual insulated grips
· Steam nozzle (HHS-303)
· 50-foot x 3⁄8-inch high pressure hose with quick connects, (50-foot steam hose on HHS-303)

Miscellaneous: 300°F/149°C operating temperature (HHS-303) - Temperature rise 150°F/66°C above ambient

View more Mi-T-M products


Part

Mi-T-M: HEO Series

Hot Water, Electric Powered Oil-Heated Belt Drive

Pump:
· Belt drive triplex General pump with ceramic plungers
· Thermal relief valve
· Factory preset trapping unloader

Motor: Open drip-proof electric motor with thermal overload protection

Frame:
· Powder coated steel side panels and frame
· Removable panels for easy access to all internal components

Components:
· Control panel shown with on/off burner switch, on/off pump/motor switch and adjustable thermostat
· Beckett burner with fuel/water separator
·1/2-inch schedule 80-coil with 5 pancake heat exchanger
· High pressure outlet hose connection

Unit Includes:
· Quick connect nozzles (0°, 15°, 25° and 40°)
· 50-foot x 3/8-inch steel wire-braided pressure hose with quick connects, swivel and bend restrictors
· Professional-grade insulated trigger gun with safety lock-off
· Adjustable pressure insulated dual lance with fixed detergent nozzle
· 10-inch draft diverter

Miscellaneous: Temperature rise 150°F above ambient, achieves 250°F/121°C outlet temperature with steam option

View more Mi-T-M products


Part

Mi-T-M: EH Series

Hot Water, Electric Belt Drive

Pump: Low pressure chemical injection

Components:
· Efficient, on-demad heat exchanger creates continuous hot water
· Adjustable thermostat
· Hour meter
· Fusible plug, temperature sensitive 350°F +/-5%, safety

Units Include:
· 50-foot x 3⁄8-inch high pressure hose with quick connects
· Quick connects nozzles - 0°, 15°, 25°, 40° and adjustable soap nozzle
· Single lance with gun

Miscellaneous:
· Maintains heat after extended use
· 20-second delay, preset
· Temperature rise 150°F/66°C above ambient
· Low inlet pressure (PSI) shut-off
· Low inlet water volume (GPM) shut-off
· Trigger gun control
· Automatic on/off, controlled gun

View more Mi-T-M products


Part

Mi-T-M: HLP Series

Hot Water, Electric Belt Drive

Pump: Thermal relief valve

Motor:
· Open drip-proof electric motor
· 35-foot electrical cord with ground fault circuit interrupter (GFCI)

Frame:
· Reinforced powder coted cabinet-style steel frame
· Wand holder
· Solid steel axles
· Pneumatic tires

Components:
· LP-gas fired natural draft with aspirating type burner (vapor only)
· High limit temperature control for added safety
· Gas regulator

Units Include:
· Quick connects nozzles - 0°, 15°, 25°, 40° and adjustable soap nozzle
· 50-foot x 3⁄8-inch steel wire-braided pressure hose with quick connects
· Professional grade insulated trigger gun with safety lock-off

Miscellaneous: Temperature rise 150°F/66°C above ambient, maximum outlet temperature is 200°F

View more Mi-T-M products